Xblitz Kinder - Pairing the Camera with the Monitor; VOX Function; Lullabies Display; Voice Transfer Function

27
B. PAIRING THE CAMERA WITH THE MONITOR
The attached camera has already been paired by default, you do not need
to do it again. Register with the receiver (LCD), unless it loses connection
with the monitor.
C. VOX FUNCTION
Press the VOX button to turn on the VOX mode. In this mode, the screen
automatically turns o to save energy. The screen is reactivated automatically
in case of noise in the child's room.
D. LULLABIES DISPLAY
Press the music playback control button to turn on the player music and
play the lullaby through the built-in camera speaker. Press the same button
again to turn o the lullaby playback.
E. VOICE TRANSFER FUNCTION
Press and hold the PTT button on the monitor device to speak to the child
via the camera speaker. The right symbol will appear at the bottom
of the screen.
F. VOLUME CONTROL
During playback, press the DOWN button to decrease the volume or the UP key
to increase the volume. The current volume will be visible on the display
for 5 seconds.
EN