Xceed EX190CS1 - Declaration of Conformity

EN-15
PLUG REPLACEMENT
（ONLY FOR
REWIRABLE PLUG OF
UK & IRELAND）
If you need to replace the tted plug then
follow the instructions below.
IMPORTANT
The wires in the mains lead are colored in
accordance with the following code:
Blue = Neutral
Brown = Live
As the colors of the wires in the mains
lead of this appliance may not correspond
with the colored markings identifying the
terminals in your plug, proceed as follows.
The wire which is colored blue must be
connected to the terminal which is marked
with N. The wire which is colored brown
must be connected to the terminal which is
marked with L.
Warning! Never connect live or neutral
wires to the earth terminal of the plug. Only
t an approved 13ABS1363/A plug and the
correct rated fuse.
Note: If a moulded plug is tted and has
to be removed take great care in disposing
of the plug and severed cable, it must
be destroyed to prevent engaging into a
socket.
13 Amp fuse approved
to BS1362
Connect
Blue to N
(neutral)
Outer sleeve
rmly clamped
Brown L(live)
Cable grip
DECLARATION OF
CONFORMITY
We,
POSITEC Germany GmbH
Postfach 32 02 16, 50796 Cologne,
Germany
Declare that the product
Description: XCEED Circular saw
Type: EX190CS1 (CS-designation of
machinery, representative of Circular
Saw)
Function: Cutting various materials with
a rotating toothed blade
Complies with the following Directives,
2006/42/EC, 2014/30/EU,
2011/65/EU & (EU)2015/863
Standards conform to
EN 62841-1, EN 62841-2-5,
EN 55014-1, EN 55014-2,
EN 61000-3-2, EN 61000-3-3
The person authorized to compile the
technical le,
Name: Marcel Filz
Address: POSITEC Germany GmbH
Postfach 32 02 16, 50796 Cologne,
Germany
Suzhou 2019/05/29
Allen Ding
Deputy Chief Engineer, Testing &
Certication
Positec Technology (China) Co., Ltd
18, Dongwang Road, Suzhou Industrial
Park, Jiangsu 215123, P. R. China