XCHARGE C6EU - User Manual

XCHARGE C6EU DC charging station
Preventive maintenance instructions
XCHARGE Europe GmbH, Borsteler Bogen 27 A, 22453 Hamburg, Germany http://www.xcharge.com/en/
Maintenance by maintenance partners / XCHARGE
Category
Predefined
maintenance
cycles
Expected
work duration
Description
External monitoring of
EVSE
1 year
2 min.
Checking the body of EVSE for scratches and damage caused
by transport or vandalism.
Checking the display and
control panel
1 year
1 min.
Check that the display and control panel are not damaged.
Checking the door
mechanism
1 year
2 min.
Checking the locking mechanism of the front and rear doors,
i.e. fixing points, handle and lock. Check that the whole lo-
cking system works well.
Inspection of internal
covers
1 year
12 min.
Check the internal protection covers and enclosures of the
EVSE. Please pay attention to dirt, penetrated water and cor-
rosion. Please remove dust in the charger (if present).
Replacing the filter mats
1 year
10 min.
Replace the filter mats if cleaning does not restore the
function. Otherwise, check the cleanliness. Cleaning must be
carried out (if necessary) in such a way that the filters are not
damaged.
Visual component
inspection
1 year
4 min.
Check that all components are marked as they were when
the machine was commissioned and are not in the event of a
fault. Please check for damage and corrosion.
Checking the cables
1 year
7 min.
Check that all cables are marked as at commissioning, please
check for damage and loose connections. The valid safety
rules must be followed and insulated tools must be used.

XCHARGE C6EU Specifications