Xcruiser XS9900D - Lining Satellite Aerial up

To Next Page

To Previous Page

XS9900D

XS9900D Xcruiser Satellite-Meter ENG- 22

� Press the ▼- button to choose between the following points.

• LNB-type • Low L.O.F. • High L.O.F.

• Frequency • Symbol rate • Polarisation

� Press the ◄- or ►- button to select a LNB type..

� If you would like to enter a customised L.O.F. select the point “customised” and enter the low L.O.F. and high L.O.F.

frequency using the NUMERIC buttons.

� Input the frequency using the NUMERIC buttons. (press OK, you will see 00000, then you can input the umbers)

� Input the symbol rate using the NUMERIC buttons.(press◄- or ► first, then input the number you want)

� Press the ◄- or ►- button to select the polarisation.

Lining satellite aerial up

-> Press the FIND button to display the menu satellite finding.

� Choose a satellite.

� Turn the receiving dish as long as the LOCK- LED lights, or the joists of the signal level and signal quality are green.

Once a signal is found, the bar graph shows the signal strength and quality. In addition C/N, FEC and a.BER (after BER)

are displayed. In addition an acoustic signal is represented.