Layout Adjustment
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
108
Edge Erase
Edge Erase enables you to specify how much of the image is to be erased around the edges of the
document. For example, you can remove the marks caused by punched holes or staples in the original.
The options are:
• All Edges is used to erase an equal amount from all the edges. Use the arrow buttons to adjust the
amount to be erased, 0–50
mm (0–2 in.). All marks or defects within the measurement set are
deleted.
• Individual Edges enables an individual amount to be erased from each of the edges.
Use the arrow buttons to adjust the amount for each edge, 0–50 mm (0–2 in.).
Tou ch OK to save the selections and exit.
Blank Page Management
Blank Page Management allows you to include or exclude blank pages in your originals when scanning.
The options are:
• Include Blank Pages is used to include blank pages.
• Remove Blank Pages is used to ignore non-imaged pages in your originals. This setting is useful
when scanning 2-sided originals with no image on side 2.
Select OK to save your selection and exit.
To Next Page
Loading...
Need help?
General
