Network Settings
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
215
Network Settings
These settings are used to enter the network parameters for the system. This section provides an
overview of the options available.
Detailed instructions for network installation are provided in the System Administrator Guide.
Online/Offline
Use this option to disconnect the printer temporarily from the network. Selecting Offline disconnects
the printer from all networks. Any job entering the system is held. Any current outgoing jobs are not
completed while the system is offline.
Select Online to reconnect the printer to the network.
TCP/IP Settings
This option enables the system administrator to enter the TCP/IP settings for the printer.
Advanced Settings
This option enables the system administrator to set up Network Settings. A warning screen is
displayed. Prior to accessing these settings as a Network Controller, reset is required after the settings
are changed. These settings must only be accessed and entered or changed by the system
administrator.
Network Logs
Use this option only if instructed to do so by the Xerox Support Center. This option is used to download
log information that can help to troubleshoot network-related problems.
USB Settings
This option is used to set up the USB Port at the rear of the printer. This port is used for software tools
and for direct printing through a print driver. This option cannot be used for direct printing through a
USB Flash Drive. The USB Port on the left side of the printer supports this function.
To Next Page
Loading...
Need help?
General
