Device Settings
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
198
• Date: Select the Format required and enter the Month, Day, and Year.
• Time: Enter the correct Hour and Minut
e and select PM or AM. If a 24-hour clock is required, select
the Display 24 hour clock option and enter the Hour and Minute by using the 24-hour clock
format.
• Select Re
boot to save and reboot the printer, or Cancel to exit without saving.
Language/Keyboard Selection
You can choose the default language used on the printer touch screen, that is, the language that
displays when the printer is switched on. You can also select the keyboard to display when a text entry
is required.
• Languages is us
ed to select the required language by using the scroll bar.
• Ke
yboard is used to select the appropriate keyboard layout for the selected language.
Custom Keyboard Button
Use this option to enter frequently used text that you would like to appear in the keyboard.
Enter the required text by using
the touch screen keyboard. Use or backspace in the keyboard to
delete an incorrect entry, or to delet
e the entire entry.
Xerox Customer Support
Use to enter the Xerox Customer Support telephone number. This number is displayed on the touch
screen and is accessed using the Machine Status button.
Enter the appropriate telephone number by using the keyboard. Use
or backspace in the keyboard
to delete an incorrect entry, or to delet
e the entire entry.
Entry Screen Defaults
This feature can only be set using CentreWare Internet Services. It enables the system administrator to
set the screen the user sees first on the printer. Instructions for accessing the feature are displayed on
the screen when the option is selected. For further information, refer to the System Administrator
Guide.
Measurements
This utility enables you to set the printer to display measurements, either in millimeters or inches, and
the numeric separator, as a period (full stop) or a comma.
• Units i
s used to select Inches or mm (millimeters) as the unit of measure.
• Numeric Separ
ator is used to define which character is used to separate numbers; select Comma
or Period.