Operational Safety Information
ColorQube 9301/9302/9303 Multifunction Printer
User Guide
227
Equipment Safety
This equipment has been designed to provide operator access to safe areas only.
Operator access to hazardous areas is restricted using covers or guards that require a tool to enable
removal.
Never remove the covers or guards that protect hazardous areas.
Do These:
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when
used on electromechanical equipment.
• Always follow all warnings and instructions that are marked on or supplied with the equipment.
• Before cleaning this product, unplug the product from the electrical outlet. Always use materials
specifically designated for this product. The use of other materials can result in poor performance
and create a hazardous situation.
• Always exercise care when moving or relocating equipment. Contact the local Xerox dealer to
arrange relocation of the equipment to a location outside of the building.
• Always locate the equipment on a solid support surface that has adequate strength to support the
weight of the printer.
• Always locate the equipment in an area that has adequate ventilation and room for servicing.
• Always unplug this equipment from the electrical outlet before cleaning.
Note: The Xerox equipment has an energy-saving function to conserve power when the
equipment is not in use. The equipment can be left on continuously.
Do Not Do These:
WARNING: Do not use aerosol cleaners. Aerosol cleaners can be explosive or flammable when
used on electromechanical equipment.
• Never use a ground adapter plug to connect the equipment to a power outlet that lacks a ground
connection terminal.
• Never attempt any maintenance function that is not specifically described in this documentation.
• Never obstruct ventilation openings. They are provided to prevent overheating.
• Never remove covers or guards that are fastened with screws. There are no operator serviceable
areas within these covers.
• Never place the machine near a radiator or any other heat source.
• Never push objects of any kind into ventilation openings.
• Never override or “cheat” any of the electrical or mechanical interlock devices.
• Never place this equipment where people might step on or trip on the power cord.
• Ensure this equipment is place a room with proper ventilation. Contact the local authorized dealer
for further information.
To Next Page
Loading...
Need help?
General
