Xerox Integrated Fiery Color Server User Manual

SERVICING Integrated Fiery Color Server for Xerox Color 550 Production Printer
3-4 7/09 CONFIGURATION TRAINING GUIDE
Copier mode DHCP Setup
To connect the Integrated Fiery Color Server to the Xerox Color 550
Production Printer, the Systems settings network protocol must be
set to DHCP for the Fiery to properly print to the copier. The below
steps describe the procedure for setting the copier protocol to
DHCP.
1. Press the Log In / Out button.
2. Enter the System Administrator password.
3. Press the Machine Status button on the copier panel.
4. Select Tools.
5. Select System Settings.
6. Select Connectivity & Network Setup.
7. Select Protocol Settings.
8. Set item 2 TCP/IP – IP Mode to IPv4 Mode.
a. To change IP Mode, select IP Mode.
b. Press the Change Setting button
c. Select IPv4 Mode.
9. Set item 3 IPv4 – IP Address Resolution to DHCP.
a. To change IP Address Resolution, select IP Address
Resolution.
b. Press the Change Setting button
c. Select DHCP.
10. Select the Close button.

Xerox Integrated Fiery Color Server Specifications

General

Brand	Xerox
Model	Integrated Fiery Color Server
Category	Software
Language	English