To Next PageTo Next PageHow to resolve paper jams exiting paper trays in Xerox All in One Printer?
To resolve paper jams when paper is exiting the paper trays in your Xerox All in One Printer: * Ensure that the edge guides of the paper tray fit snugly against the paper stack. * Do not fill the paper trays above the MAX fill line indicator. * Close the tray slowly to prevent the paper stack from shifting.
How to fix paper jams in optional trays of Xerox All in One Printer?
To address paper jams in optional Trays 6-9 of your Xerox All in One Printer: * Visually inspect the Feed, Retard, and/or Nudger Rolls for wear or damage. * Check the HFSI interval status for the rolls and replace them if necessary.
How to fix Xerox Versant 180 Press if prints are not on desired paper size?
If your Xerox All in One Printer is not printing on the desired paper size, here's what you can do: * Make sure the correct paper size and type are loaded in the paper trays. * Adjust the paper guides to the correct positions. * Select the appropriate paper size, tray, and weight at the print server, ensuring these attributes are correctly set in the Tray Properties window. * Confirm that 'Fit to Paper' or a similar option is not enabled in your print driver.
What to do if Xerox Versant 180 Press does not complete print job?
If your Xerox All in One Printer is not completing print jobs, consider the following: * Check if the printer is connected to the network by printing a test page from the print server. * Verify the power cable is securely connected to both the printer and a power outlet. * Ensure network cables are securely attached to the printer. * Clear the print job from the print queue and resend it. * Try restarting the printer by powering it off and on.
Why does my Xerox Versant 180 Press feed multiple sheets?
If your Xerox All in One Printer is feeding multiple sheets from the paper trays, consider these solutions: * Avoid overfilling the paper trays above the MAX fill line indicator. * Remove the paper from the tray and fan the sheets to separate any that are stuck together. * If using predrilled sheets, fan them to separate any that may be joined at the holes. * If environmental conditions are too dry, increase the humidity to minimize static, which can cause paper and transparencies to stick together. * Gently fan transparencies before loading them.
How to unlock Xerox All in One Printer UI?
If the UI on your Xerox All in One Printer is locked up or completely dark: * If the UI buttons or keyboard are unresponsive, power down the print engine, wait 30 seconds, and then power it back on to reboot the system. * If the Power Saver button is lit, the printer is in Power Saver Mode. Press the Power Saver button on the UI to exit Power Saver Mode.
What causes output jams exiting to the Offset Catch Tray on Xerox Versant 180 Press All in One Printer?
Output jams when exiting the Xerox All in One Printer to the Offset Catch Tray can occur because: * The Offset Catch Tray can hold up to 500 sheets of 24 lb (90 gsm) paper. Empty the tray when it approaches this limit. * Ensure the first sheet is not blocking the paper exit, especially with 11 x 17 inch (A3) output.
Why is there excessive paper curl in my Xerox Versant 180 Press?
Excessive paper curl in your Xerox All in One Printer output can be due to: * Incorrect paper weight and type selection. * High dry ink (toner) coverage. * The paper weight and whether it is coated or uncoated. * The humidity conditions at the printer.
How to clear message on Xerox Versant 180 Press All in One Printer UI?
If a message on the Xerox All in One Printer UI will not clear: * For paper jam faults, ensure all paper, including small pieces, is removed from the area. * Reboot the printer using the On/Off button located on top of the press near the UI.
Why Xerox All in One Printer pages are not stapled or punched?
If pages are not being stapled or punched by the PR Finisher or PR Booklet Maker Finisher on your Xerox All in One Printer: * Select the appropriate option on the press touch screen. * Ensure there are staples in the staple cartridge. * Check that the punch scrap container is not full.
General| Print Resolution | 2400 x 2400 dpi |
|---|---|
| Paper Capacity | Standard: 1, 900 sheets; Maximum: 5, 900 sheets |
| Monthly Duty Cycle | 750, 000 pages |
| Paper Weight | 52 to 350 gsm |
| Duplex Printing | Automatic |
| Supported Operating Systems | Windows, Mac OS, Linux |
| Print Speed | 80 ppm |
| Media Types | Labels, envelopes |
| Connectivity | Ethernet |
| Output Capacity | 500 sheets |
