Installation
Xerox® Smart Card
Installation Guide
23
Acquiring Logged in User's E-Mail Address
This feature allows the System Administrator to set where the device acquires the logged in user’s e-
mail address from when populating the e-mail From: field.
Using the default Auto setting, the device checks the Smart Card for the user’s e-mail address
information. If the information is not available from the card, the device checks the LDAP server. If the
information is not available from the LDAP server, the device uses the default e-mail address to
populate the field.
If required, the System Administrator can change the setting to obtain the user's e-mail address from
the Smart Card only, or from the Network Address Book (LDAP) only.
1. In the related services table on the
Authentication Setup page, click
Edit... on the Acquiring Logged in
User’s E-mail Address row.
2. Select the option required for
obtaining the logged in user’s e-mail
address:
•Auto
•Only Smart Card
• Only Network Address Book
(LDAP)
If Only Network Address Book
(LDAP) is selected, configure the
Server Configuration and Feature
Enablement settings required.
3. Click Save to apply the new settings and return to the Authentication Setup page. Click Cancel to
return to the Authentication Setup page.
To Next Page
Loading...
