Scan to FTP/SMB (Optional)
Copyright © 2007, Xerox Corporation. All rights reserved.
12
Procedure for Scan to FTP/SMB
After the appropriate Ports have been enabled, TCP/IP has been configured, and the
receiving computers address added to the Address Book, the Scan to PC (FTP/SMB) feature
can be used as follows.
1. Select Scan to PC from the All Services screen.
2. Touch Transfer Protocol, select a protocol, and touch Save.
3. Touch the blank lines on the screen and manually enter Server settings, or touch
Address Book to locate the receiving computer. For SMB you can also browse the
Microsoft Network.
4. Place your document in the document handler and press Start. Progress of the data
transfer will be displayed on screen.
To Next Page
Loading...
Need help?
General
