To Next Page

To Previous Page

Network Scanning Setup (Optional)

9. Enter any Document Management Field information (optional).

Note that if this box contains listings, you can make individual selections, then click

Edit instead. This information is filed with your scanned document in the Job Log. The

Job Log can then be accessed by third party software and the information retrieved and

associated with the scanned file.

a. Click Add.

b. Refer to the displayed descriptions to set your parameters as desired.

c. Click Apply when done.

10. To set parameters for the default template, select Edit for any of the available

categories of settings. These include: Network Scanning, Advanced Settings, Layout

Adjustment, Filing Options, Report Options, and Compression Capability.

11. Click Apply to save your settings.

Note

Select MRC Compression, if available, to use Mixed Raster Content (MRC)

compression. MRC is used to divide the scanned image based on content, and

then compress each area in the optimal manner for that image area. This option

allows for smaller output files with better image quality.

Note

Note regarding Searchable XPS: If this option is available, the Searchable

Format provides a second layer of data with the text of the scanned document.

The second layer is converted to an optical character readable format, enabling

the text of the document to be searched on, copied, and pasted, as desired.

Procedure for Network Scanning

1. At the device select All Services and Network Scanning.

2. Select a template from the list. You can also change any other value from the control

panel without impacting the template configuration; only the current job will be

affected.

3. Load a sample document into the document feeder.

4. Press the green Start button. The job is sent to the server using FTP or SMB protocol

as defined within the template.

5. From a workstation, log on to the FTP or SMB Server. Navigate to the repository

(destination) that was specified earlier. Your scanned document is located in that folder.

Note

If remote authentication has been enabled, a separate login screen appears when

the Network Scanning feature is selected. Documents are not scanned unless the

remote authentication server authenticates user access.

Xerox WorkCentre 7328 Setup Guide

Other manuals for Xerox WorkCentre 7328