Xetawave Xeta9x-E User Manual

Xeta9
XetaWave Ethernet Bridge
User’s Manual
June 17, 2014
Firmware version: 2.03 build 3166 and above
Models: Xeta9-E, Xeta9x9-E, Xeta9x-E (Emancipator+)

Xetawave Xeta9x-E Specifications

General

Brand	Xetawave
Model	Xeta9x-E
Category	Network Router
Language	English

Summary

Warranty Information

Regulatory Compliance

FCC Notifications

Compliance statements and conditions for FCC regulations.

UL Notifications

Safety suitability for hazardous locations and temperature classes.

Mechanical Design

Radio Models and Physical Layout

Describes the physical characteristics of Enclosed Ethernet Radios and Emancipator+ models.

Quick Start Guide

Master Radio Configuration

Steps to configure the AP (Master) radio's IP and RF settings (ISM/MAS).

Slave Radio Configuration

Steps to configure the Remote (Slave) radio's IP and RF settings (ISM/MAS).

Web Interface Overview

Main Menu and System Status

Overview of the main menu, device status, and key identifiers.

Network and VLAN Settings

Configuration of IP address, subnet mask, and VLAN settings.

RF Modules and Settings

Manages RF module power and configures RF band, frequencies, and protocol.

Serial Communications

Configuration and management of terminal server and serial port settings.

Security Settings

Configures AES-256 encryption for over-the-air transmissions.

System Administration and Firmware

Manages user settings, security, and firmware upgrade procedures.

Diagnostics and Utilities

Tools for testing connectivity (RF Ping) and monitoring system status.

Modem Recovery Procedures

Appendices

Serial Pin Assignments

Diagrams and tables showing serial pin definitions for different radio models.

Status LEDs Overview

Details the meaning of status LEDs for enclosed Ethernet radios and Xeta9x-E.