Need help?Do you have a question about the Xetawave Xeta9-E and is the answer not in the manual?
General| Brand | Xetawave |
|---|---|
| Model | Xeta9-E |
| Category | Network Router |
| Language | English |
Details XetaWave LLC's warranty against defects in materials and manufacturing for two years from purchase.
Device compliance with FCC rules, Industry Canada standards, and RF exposure limits.
Requirements for antenna installation to ensure US/FCC and Canadian compliance.
Physical layout and port descriptions for Enclosed Ethernet Radios and Emancipator+ models.
Explanation of status LEDs for XetaWave Ethernet radios and Emancipator+ models.
Configure the AP (Master) radio's IP and RF settings (ISM/MAS bands) for a Point-to-Multi-Point network.
Configure the Remote (Slave) radio's IP and RF settings (ISM/MAS bands) for network communication.
Overview of the web interface, including the main menu and general navigation tips.
Configuration of IP address, subnet mask, default gateway, and VLAN settings.
Page to view and manage the status and configuration of installed RF modules.
Detailed settings for RF parameters, protocols, modulation, and packet size tradeoffs.
Configuration of serial ports, terminal servers, and port binding.
Enables AES-256 encryption for over-the-air transmissions between radios.
Configures level change alerts via the I/O connector for signal monitoring.
User management, password changes, and security settings for the device.
Procedure for uploading and programming new software to the radio and Ethernet board.
Tests connectivity and link quality between master and remote/slave radios.
Displays statistics on Ethernet frames, IP protocols, and ARP cache for network traffic analysis.
Reports RF and radio operating parameters like signal strength, noise, power, and occupancy.
Reports current connections and statistical information for radio's terminal servers and serial ports.
Procedures for resetting the radio to factory default settings via serial port connection.
Details serial pin assignments for enclosed Ethernet radios and Emancipator+ models.
To Next Page