EasyManua.ls Logo

Xetawave Xeta9-E - Network Settings

Default Icon
68 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
37
3 Web Interface Overview
XetaWave Ethernet radios can be quickly configured using a web-based interface. The
default IP address to access the web administration pages is 192.168.0.3. While
XetaWave radios are capable of multi-megabit data rates, web administration pages
have been developed to support functional access over slow-speed links.
The IP address of the radio can be changed by the user at anytime, thus if the IP address
of the unit is not known, then one must use the serial COM interface to either discover
the IP address, or to reset the unit back to factory (192.168.0.3) condition.
Due to slightly different behaviour among web-browsers, it may occasionally be
necessary to manually refresh a page or click on the link on the left navigation bar to
reload a page.
Interface
Overview

Related product manuals