More Settings
The various settings are described as follows.
Select a brightness mode and adjust the parameters.
Set your device and image at any interface by using the Settings button " "
on the remote control.
Brightness and color
Image mode
Sound effect
Focus Calibration
Keystone Calibration
Adjusts the frame ratio of a signal source.
If you are not satisfied with the effect of the automatic keystone
correction function, you can recalibrate the automatic keystone
correction function through "Keystone Calibration".
Note: Follow instructions on the screen.
If the automatic keystone correction function is not as good as before
after long-term use, you can recalibrate the gyro through "Gyro
Calibration" to optimize the effect of automatic keystone correction.
Follow instructions on the screen.
If the auto focus function is not as good as before after long-term use,
you can tune the automatic focus adjustment function through "Focus
Calibration". Note: Follow instructions on the screen.
Select different image modes in different scenarios, such as movie,
football, office and game, to adjust the image parameters of video or
signal source. The low-latency option is available in game mode.
Gyro Calibration
10
To Next Page
Loading...
