XHC WHB03 User Manual

成 都 新 宏 畅 无 线 科 技 有 限 公 司 www.cdxhctech.com
Chengdu Xin hong chang Wireless Technology Co.,Ltd
- 11 -
Displays status
Functional Description
Show All 0 ： Engraving machine motion control software
（NcStudio）that is not open Or engraving machine motion control
software（NcStudio）crash
Blinking 2 times, then close the LCD display
Instructions：USB wireless receiver is not connected to
the computer's USB port If the receiver is connected to a
computer USB port, wireless controller so that the signal is not
good, connection quality is poor
Application instructions
：
Start driver software, it will drive in the computer taskbar icon
Icon Functional Description Operation Description
Working properly
Close engraving machine motion
control software
（
NcStudio
）
or
engraving machine motion control
software
（
NcStudio
）
has crashed
Lock the handle or is not inserted USB
wireless receiver
The mouse into the computer task bar
icon, right click inside the pop-up menu,
select the lock handle.
If the handle is locked, pressing any key
will not work the handle

XHC WHB03 Specifications

General

Brand	XHC
Model	WHB03
Category	Remote Control
Language	English