EasyManua.ls Logo

XHC WHB03 - Technical Specifications; DC Power Specifications; RF Performance Details

Default Icon
11 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
成 都 新 宏 畅 无 线 科 技 有 限 公 司 www.cdxhctech.com
Chengdu Xin hong chang Wireless Technology Co.,Ltd
- 3 -
DC Description
Name Voltage Current Note
Wireless USB Receiver
4
.
5V
—
5
.
0V
Less than 50ma
Wireless Handle
1
.
5V
—
3
.
0V
Average Current
Less than 2ma
Use of time More than 2
months USE Two
2000MAH Battery
Note: Wireless Handle
Need
Two AA Battery
;
When the Low voltage indicator LED light
;
the battery is
completely
;
Proposed to replace the battery
3. RF
Performance Description
No.
Performance or Parameters Description
1
The RF is Standard with
2.4G ISM
,the Tx power is 0DB and the RX sensitivity is -98DB.
2
The RF has 64 channels,the channel gap is 1Mhz
3
The transmission distance is further than 15 meters with no barrier
4
The protocol Designed with high performance; Low power consumption;Automatic
learning ID Number
5
To jump frequency Adaptively when noised ,which can work with 2.4G wireless Mic ,Wlan
and Bluetooth etc. devices.
6
32 sets Wireless Handle work fine at the same time in one room ,with no-interference
each other
4. Use the steps Description
Step 1
Set up the Driver Software
,
and flished Set up
:
Please send CD into the CD-ROM
;
Please follow the computer prompts
,
Set up the Driver
Software Until flished Set up

Related product manuals