What to do if my Xiaomi B105 won't charge?
If your Xiaomi Vacuum Cleaner isn't charging, verify that the power cord is correctly plugged into both the charging dock and the power outlet. Also, make sure the charging contacts are clean. If they aren't, wipe the charging contacts on both the dock and the robot vacuum with a dry cloth.
What to do if Xiaomi B105 Vacuum Cleaner does not return to the dock to charge?
If your Xiaomi Vacuum Cleaner cannot return to the dock to charge, check for obstacles around the charging dock and place the dock in a location without any. Ensure there are no obstacles within 0.5 meters on both sides and 1.5 meters in front of the dock. Also, clean the dock's signaling area.
How to fix Xiaomi Vacuum Cleaner network configuration failure?
If you're experiencing network configuration failures with your Xiaomi Vacuum Cleaner, ensure that you've entered the correct Wi-Fi password. Also, switch to a 2.4 GHz network, as 5 GHz networks and enterprise routers are not currently supported. Make sure the vacuum cleaner is in an area with a strong Wi-Fi signal. If problems persist, exit and reopen the app, and then try configuring the network again following the correct steps.
Why Xiaomi B105 does not turn on?
If your Xiaomi Vacuum Cleaner does not turn on, the battery level may be low. Fully charge the robot vacuum and then try again. Also, make sure to use the robot vacuum between 0°C and 40°C, as it may not turn on if the ambient temperature is too low or too high.
What to do if my Xiaomi Vacuum Cleaner mop pad is not wet enough?
If the mop pad on your Xiaomi Vacuum Cleaner isn't wet enough, check whether the water in the water tank is sufficient. Before mopping, dampen the mop pad and wring out any excess water. Also, ensure you've installed the mop pads correctly, following the instructions in the user manual.
What to do if Xiaomi B105 Vacuum Cleaner mop pad is too wet?
If the mop pad on your Xiaomi Vacuum Cleaner is too wet, dampen the mop pad and make sure to wring out excess water. Also, ensure that the plug of the water tank is tightened properly.
Why Xiaomi Vacuum Cleaner does not resume cleaning after charging?
The Xiaomi Vacuum Cleaner does not resume cleaning in do not disturb (DND) mode, or after manually being returned to the dock to charge.
Why does my Xiaomi Vacuum Cleaner not clean efficiently?
If your Xiaomi Vacuum Cleaner isn't cleaning as efficiently as it used to, or if it's leaving dust behind, there are a few things to check. First, see if the dust compartment is full and empty it if it is. Also, inspect the filter and clean it if needed. Finally, check the brushes to ensure nothing is wrapped around them.
What to do if my Xiaomi B105 Vacuum Cleaner makes a strange noise?
If your Xiaomi Vacuum Cleaner is making a strange noise, it might be due to a foreign object caught in the brush, side brush, or one of the main wheels. Stop the vacuum and remove any debris you find.
Why Xiaomi B105 Vacuum Cleaner does not carry out the scheduled cleanup?
If your Xiaomi Vacuum Cleaner isn't performing scheduled cleanups, check whether the battery level is sufficient. The robot vacuum needs to have a battery level of 15% or more to start a scheduled cleanup.
General safety guidelines and usage limitations for the robot vacuum.
Steps to connect the robot vacuum to the Mi Home/Xiaomi Home mobile application.
How to initiate a cleaning cycle either via the robot or the app.
Procedure to reset the Wi-Fi connection if there are connectivity issues.
Solutions for power, charging, and Wi-Fi configuration problems.
Troubleshooting movement, obstacle avoidance, and returning to the charging dock.
Addressing cleaning efficiency, noise, and component maintenance problems.
Solutions for mop pad issues and missed scheduled cleanups.
General| Model Number | B105 |
|---|---|
| Type | Robot Vacuum Cleaner |
| Battery Capacity | 3200mAh |
| Navigation | LDS Laser Navigation |
| App Control | Yes |
| Voice Control | Yes, via Google Assistant and Amazon Alexa |
To Next Page