Xiaomi BHR5960EU - Error Codes; Troubleshooting

09
Aer placing the jar on the base, return
to the menu screen, and press the
cancel buon to enter standby mode.
The blender will return to normal when the
temperature drops. Press the cancel
buon to enter standby mode.
E02
Contact the aer-sale service team.
E05
E10
Contact the aer-sale service team.E11
Place the jar
Overheated
Temperature
sensor error
Communication
error
No jar placed on the
base
High temperature alert
from boom
temperature sensor
Boom temperature
sensor has a short or
broken circuit.
Power board and
display panel
communication error
Error Codes
Clean out the food in the jar aer the
power is off, and wait for the blender
to cool down before powering it on again.
Motor overloaded
Code
Motor overloadedE01
Message Explanation Solution
Troubleshooting
Issues
Food overflows
Burnt food on the
jar's boom
Ingredients cannot
be blended.
Ingredients not hot
aer cooking
Add a proper amount of ingredients.
Add water to the proper water level.
Select the desired function according to the user manual.
Contact the aer-sale service team.
Add a proper amount of ingredients.
Do not add ingredients that are easily burnt on the jar's boom,
like flour.
Add water to the proper water level.
Clean before use.
Select the desired function according to the user manual.
Contact the aer-sale service team.
Select the desired function according to the user manual.
Contact the aer-sale service team.
Display does not light
up.
Check the power cord and make sure it is plugged in and connected to
the power supply.
Contact the aer-sale service team.
The display is on but
the blender is not
working.
Re-select the function and press the knob to enable it.
Add water to the proper water level and restart the blender aer it
cools down.
Unplug first, then power on and follow the normal operation steps.
Contact the aer-sale service team.
Solutions