56
ENEN
7. Use the Mopping Function
How to Use
It is recommended that all oors are vacuumed at least three times before
the rst mopping session to achieve a better cleaning eect.
1) Dampen the mop pad and wring out excess water. Insert the mop pad into
the slot of the water tank as shown in the gure, and paste the pad rmly.
3) Align the mopping module as indicated by the arrow, then slide it into the
back of the robot until it clicks into place. Press the button
or use the Mi
Home/Xiaomi Home app to start cleaning.
2) Open the water tank lid, ll the tank with water, then securely close the lid.
4) Press the two side clips inwards and slide the water tank backwards to
separate it from the robot.
Note:
• It is not recommended to use the mopping function on carpets.
• Use the app to adjust the water ow as required.
Note:
Do not use detergent or disinfectant.
55
Note: When the robot is charging or not in use, remove the mopping module,
pour out all the remaining water in the tank, and clean the mop pad to prevent
mildew or odors.
Click
Click
① ② ③
Routine Maintenance
Clean the Dust Bin
1. Open the robot cover, then press the dust
bin clip to remove the dust bin.
2. Open the bin cover and empty the
bin as shown in the diagram.
3. Remove the lter and tap its basket gently.
5. Rinse the dust bin and lter with water until they are clean. Thoroughly dry the lter before re-
installing.
4. Clean the dust intake.
Note: Do not attempt to clean the lter with a
brush or nger.
Note:
• Rinse the lter with clean water only.Do not use detergent.
• Before using, keep it in a well-ventilated or cool place.
To Next Page
Loading...
Need help?
General
