Why does my Xiaomi Mi Robot Vacuum-Mop Vacuum Cleaner say error 4?
Error 4 indicates that a foreign object might be caught in the brush. Remove the brush and clean its bristles and bearings to resolve this issue.
What to do if my Xiaomi Mi Robot Vacuum-Mop shows error 7?
Error 7 means that the Xiaomi Vacuum Cleaner may be caught or stuck. Clear away any obstructions around it to allow it to continue cleaning.
How to fix error 6 on Xiaomi Vacuum Cleaner?
Error 6 suggests that a foreign object might be caught in one of the main wheels. Clean the wheels, then reactivate the vacuum-mop to resolve this issue.
What does error 1 mean on a Xiaomi Mi Robot Vacuum-Mop?
Error 1 indicates that the collision buffer is stuck. Gently tap it to remove any foreign objects. If this doesn't work, move the vacuum-mop to a new area and reactivate it.
Why does my Xiaomi Mi Robot Vacuum-Mop say error 3?
Error 3 can occur if part of the vacuum is off the ground or if the cliff sensor is dirty. Place the vacuum on level ground and reactivate it. Also, clean the cliff sensor to rule out dirt as the cause.
How to fix error 5 on Xiaomi Mi Robot Vacuum-Mop?
Error 5 means that a foreign object might be caught in the side brush. Remove the side brush and clean it.
What to do if Xiaomi Vacuum Cleaner displays error 14?
Error 14 means that the vacuum-mop cannot continue to operate due to an internal error. Try reseting the system.
How to fix Xiaomi Mi Robot Vacuum-Mop Vacuum Cleaner error 2?
Error 2 indicates that a wheel is off the ground. Place the vacuum-mop on level ground and reactivate it.
How to resolve error 9 on Xiaomi Vacuum Cleaner?
Error 9 means that the vacuum-mop is too close to a virtual wall. Move the vacuum-mop to a new location, then reactivate it.
What to do if Xiaomi Mi Robot Vacuum-Mop Vacuum Cleaner shows error 13?
Wipe the visual navigation sensor, then reactivate the vacuum-mop.
Important safety guidelines, usage restrictions, and warnings for the vacuum-mop.
Safety precautions related to the battery, charging process, and disposal.
Steps for placing the charging dock and performing the initial charge.
Instructions for connecting to Mi Home/Xiaomi Home, Google Assistant, and Alexa.
Explains how to power on/off, start/pause cleaning, and charge the device.
Procedures for cleaning the main brush, dust compartment, and filter.
Lists common error codes displayed by the vacuum-mop and their solutions.
General| Shape | Round |
|---|---|
| Product color | White |
| Housing material | Acrylonitrile butadiene styrene (ABS), Metal |
| Remotely operated | Yes |
| Dust container type | Bagless |
| Brush type | Roller brush & Side brush |
| Noise level | - dB |
| Water tank capacity | 0.2 L |
| Dust capacity (total) | 0.6 L |
| HEPA filtration system | - |
| Mobile operating systems supported | Android, iOS |
| Charging time | 4 h |
| Battery voltage | 14.4 V |
| AC input voltage | 100 - 240 V |
| Battery capacity | 2400 mAh |
| AC input frequency | 50 - 60 Hz |
| Power consumption (typical) | 40 W |
| Suction power | 2500 Pa |
Weight and Dimensions| Depth | 300 mm |
|---|---|
| Width | 350 mm |
| Height | 81.5 mm |
| Weight | 3600 g |
To Next Page