What to do if my Xiaomi Mi Robot Vacuum S10+ Vacuum Cleaner won't charge?
If your Xiaomi Vacuum Cleaner isn't charging, verify that the power cord is correctly plugged into both the charging dock and the power outlet. Also, make sure the charging contacts are clean. If they aren't, wipe the charging contacts on both the dock and the robot vacuum with a dry cloth.
What to do if Xiaomi Mi Robot Vacuum S10+ Vacuum Cleaner does not return to the dock to charge?
If your Xiaomi Vacuum Cleaner cannot return to the dock to charge, check for obstacles around the charging dock and place the dock in a location without any. Ensure there are no obstacles within 0.5 meters on both sides and 1.5 meters in front of the dock. Also, clean the dock's signaling area.
How to fix Xiaomi Mi Robot Vacuum S10+ network configuration failure?
If you're experiencing network configuration failures with your Xiaomi Vacuum Cleaner, ensure that you've entered the correct Wi-Fi password. Also, switch to a 2.4 GHz network, as 5 GHz networks and enterprise routers are not currently supported. Make sure the vacuum cleaner is in an area with a strong Wi-Fi signal. If problems persist, exit and reopen the app, and then try configuring the network again following the correct steps.
Why Xiaomi Vacuum Cleaner does not turn on?
If your Xiaomi Vacuum Cleaner does not turn on, the battery level may be low. Fully charge the robot vacuum and then try again. Also, make sure to use the robot vacuum between 0°C and 40°C, as it may not turn on if the ambient temperature is too low or too high.
What to do if my Xiaomi Mi Robot Vacuum S10+ Vacuum Cleaner mop pad is not wet enough?
If the mop pad on your Xiaomi Vacuum Cleaner isn't wet enough, check whether the water in the water tank is sufficient. Before mopping, dampen the mop pad and wring out any excess water. Also, ensure you've installed the mop pads correctly, following the instructions in the user manual.
What to do if Xiaomi Mi Robot Vacuum S10+ Vacuum Cleaner mop pad is too wet?
If the mop pad on your Xiaomi Vacuum Cleaner is too wet, dampen the mop pad and make sure to wring out excess water. Also, ensure that the plug of the water tank is tightened properly.
Why Xiaomi Mi Robot Vacuum S10+ Vacuum Cleaner does not resume cleaning after charging?
The Xiaomi Vacuum Cleaner does not resume cleaning in do not disturb (DND) mode, or after manually being returned to the dock to charge.
Why does my Xiaomi Mi Robot Vacuum S10+ not clean efficiently?
If your Xiaomi Vacuum Cleaner isn't cleaning as efficiently as it used to, or if it's leaving dust behind, there are a few things to check. First, see if the dust compartment is full and empty it if it is. Also, inspect the filter and clean it if needed. Finally, check the brushes to ensure nothing is wrapped around them.
What to do if my Xiaomi Mi Robot Vacuum S10+ makes a strange noise?
If your Xiaomi Vacuum Cleaner is making a strange noise, it might be due to a foreign object caught in the brush, side brush, or one of the main wheels. Stop the vacuum and remove any debris you find.
Why Xiaomi Mi Robot Vacuum S10+ does not carry out the scheduled cleanup?
If your Xiaomi Vacuum Cleaner isn't performing scheduled cleanups, check whether the battery level is sufficient. The robot vacuum needs to have a battery level of 15% or more to start a scheduled cleanup.
General| Suction Power | 4000 Pa |
|---|---|
| Water Tank Capacity | 200 ml |
| Battery Capacity | 5200 mAh |
| Navigation | LDS Laser Navigation |
| Automatic Emptying | No |
| Compatible App | Xiaomi Home App |
| Climbing Ability | 20 mm |
| Auto Recharge | Yes |
| Multi-floor Mapping | Yes |
| Scheduled Cleaning | Yes |
| Mopping Function | Yes |
| Obstacle Avoidance | Yes |
| App Control | Yes |
| Voice Control | Yes |
| Connectivity | Wi-Fi |
| Voice Control Compatibility | Google Assistant, Amazon Alexa |
| Virtual Walls | Yes (via app) |
Guidelines and limitations for safe and proper use of the robot vacuum.
Important safety precautions and instructions for battery handling and charging.
Detailed list of all included and optional accessories for the robot vacuum.
Explanation of buttons, lights, and their functions on the robot vacuum.
Visual guide to the various parts and sensors of the robot vacuum.
Overview of charging dock, water tank, and mop assembly parts.
Guide to initial installation, including brush and dock setup.
Connecting to the app, starting cleaning, and Wi-Fi reset.
Detailed steps for performing vacuuming and mopping tasks.
Managing cleaning tasks, firmware updates, and settings.
Routine cleaning of essential sensors and the main brush.
Maintenance guide for side brush, dust compartment, filter, and wheel.
Procedures for cleaning the mop pad and charging dock.
Tips for maintaining battery health and performance.
Solutions for power, charging, and robot movement problems.
Addressing issues with cleaning efficiency and network configuration.
Resolving problems with scheduled cleanups and mopping functions.
Technical specifications for the robot vacuum and charging dock.
Information on the proper disposal and recycling of the equipment.
To Next Page