124.0 cm
124.0 cm 120.0 cm
120.0 cm
Installing the Accessories onto the Vacuum Cleaner
How to Install
Click
Click
Click
Installing the Vacuum Cleaner Wall Mount and Accessory Wall Mount
1. Choose the location: Find a cool and dry place with an electrical outlet nearby and free from obstructions like
wires or pipes in the wall. Ensure the accessory wall mount is installed at a height of 124.0 cm from the ground,
and the vacuum cleaner wall mount is 120.0 cm, respectively. Maintain a recommended spacing of 15 cm
between the two wall mounts.
2. Drill the holes: Make marks on the wall respectively according to the holes on the two wall mounts. Use a power
drill with a 5 mm drill bit to drill a hole approximately 40 mm deep in each marked position, and then insert the
wall plug into each hole.
3. Install the wall mounts: Align the holes in the wall mounts with the holes drilled in the wall, and then use the
self-tapping screw to secure the wall mounts to the wall.
Note: Please strictly follow the height as illustrated when installing the two wall mounts to prevent affecting the
storage.
Vacuum Cleaner Wall Mount Installation
Accessory Wall Mount Installation
Note: Do not use the extension hose with the electric brush bar or mini electric brush.
To Next Page
Loading...
