12
How to Use
The first time the hair dryer is turned on, it is set to hot
air mode by default. Briefly press the air temperature
buon to cycle through the air temperature modes.
The next time the hair dryer is turned on, it is set to
mode that was used before it was turned off.
2.
Note: While in different air temperature modes, the
corresponding indicator status is as follows:
Hot Hot & Cold Cycle Cold
Orange Blinking blue and orange
alternately
Blue
First, make sure the switch is in the off position 〇,
then plug the power plug into the outlet and switch
to the low (I) or high (II) seing.
1.
To Next Page
