EN-12
Power on/off
You will hear the power-on music
you will hear the power-off music
Press and hold the sync
button for 2 seconds until the
blue light becomes to solid
Press and hold the sync
button for 15 seconds until
the LED blinks red
Press and hold the sync button
for 8 seconds until the LED
blinks blue, release the button
Use USB to charge the camera,
Red blinks three times
Solid green
Blinking blue
Solid blue
(turn off after 5 seconds)
Blue and orange blinks 3 times
alternately
Starts charging
Fully charged
Start resetting
(The camera will reboot during
the reset process)
Reset successfully
Pairing Successful
Pairing Failed
Camera
charging
Camera
reset
Camera LED Status Status
Orange blinks once
PIR detects motion
PIR continues to detect motionOrange blinks continuously
PIR
detection
sensitivity
adjustment
To Next Page
Loading...
