Restoring Factory Settings
Cleaning & Maintenance
with some neutral detergent.
Do not submerge the ventilation holes into water.
sticker, so as to avoid damage to the wall or the clock.
This clock is not suitable for use in environments with temperatures below 0°C.
Please keep it away from harsh environments with high temperatures or high humidity.
This clock is designed to facilitate a healthy lifestyle, but should not be used as a
measuring tool.
Precautions
06
Remove the cover on the back of the
clock, and connect the “Reset” and the
“Gnd” metal points near any battery with
a metal conductive material for more
than 7 seconds when the clock is
working. After the clock restarts, the
factory settings are restored.
To Next Page
Loading...