Need help?Do you have a question about the Xiaomi MI PRO2 and is the answer not in the manual?
General| Top Speed | 25 km/h |
|---|---|
| Range | 45 km |
| Motor Power | 300 W |
| Max. Power | 600 W |
| Battery Capacity | 12800 mAh / 474 Wh |
| Weight | 14.2 kg |
| Max Load | 100 kg |
| Charging Time | 8-9 hours |
| Brakes | E-ABS and Disc Brake |
| IP Rating | IP54 |
| Model | MI PRO2 |
| Tires | 8.5-inch Pneumatic Tires |
Fold the handlebar stem up, fasten it, and put down the kickstand.
Install the handlebar onto the stem.
Tighten the screws on both sides of the stem with the T-shaped Allen key.
Lift the rubber flap before plugging in the charger.
Plug the power adapter into the charging port.
Unplug the charger when charging is completed and replace the rubber flap.
Scan QR code to download and install the Mi Home/Xiaomi Home app.
Open the app and follow prompts to add your scooter.
Always wear a helmet, elbow pads, and knee pads.
Step on the deck with one foot and push off the ground.
Accelerator engages when coasting speed exceeds 5 km/h.
Release accelerator and squeeze brake lever for sudden braking.
Tilt body and turn handlebar smoothly when turning.
Always steer clear of obstacles.
Maintain speed between 5-10 km/h on uneven surfaces.
Avoid hitting head on door frames, elevators, and overhead obstacles.
Do not press accelerator when walking alongside scooter.
Do not ride in traffic lanes or residential areas with mixed vehicle/pedestrian traffic.
Do not abruptly change steering direction at high speed.
Do not hang bags or heavy stuff on the handlebar.
Do not ride on one foot.
Do not accelerate downhill; brake to slow; step off on steep inclines.
Do not use phone or wear earphones while operating scooter.
Do not ride in rain, through puddles, or water obstacles.
Do not ride with anyone else, including children.
Do not keep feet on the rear mudguard.
Do not touch the disc brake.
Do not let go of the handlebar while riding.
Do not ride up/down stairs or jump over obstacles.
Open safety hook and quick release lever by turning handlebar stem.
Align the bell and buckle, then hook them together for folding.
Hold handlebar stem with one or both hands to carry the scooter.
Disengage the bell lever from the mudguard buckle when unfolding.
Unscrew the valve cap before performing tire maintenance.
Connect the extension nozzle to the tire valve stem.
Connect pump to inflate the tire.
Tap "More Settings" in the app to set a password for your scooter.
To Next Page
