I have finished seing up my network. Why can't I connect to the Internet?
Step 1:
Use your phone to search for the Wi-Fi network set by your router. If you can’t
find it, make sure that the router is connected to the power and has finished booting up
Step 2: Connect your phone to your router's Wi-Fi network, go to "router.miwifi.com", and try
to fix the problem based on the network diagnostics results
I've forgoen the administrator password for my router. What should I do?
If you haven’t set a specific password, your administrator password will be the same as
your Wi-Fi password, so try using this to log in. If the problem persists, it is recommended
that you restore your router to the factory seings, then set up the network again
How do I restore my router to the factory seings?
First make sure that the router has finished booting up, then hold down the Reset buon at
the base of the router for more than 5 seconds and let go when the system status light turns
orange. When the router finishes booting up again, the reset was successful
What do the different indicator lights mean on the router?
There should be two indicator lights on the front panel, which are the network status light
(blue light) and the system status light (three colors: blue, orange, and purple)
Network status light
Nothing is plugged into the external Internet port
or there is a problem with the connection
Off
Network connection normalOn
Light with one color (blue)
System status light
Switched off or not connected to the powerOff
System updating (flashing), system booting up
(on, not flashing)
Orange
Functioning normally (on, not flashing)blue
Safe mode (flashing), system failure (on, not flashing)purple
three colors (blue, orange, and purple)
Sending or receiving dataFlashing
System status light Network status light
FAQ
English
6