Xiaomi Mi Water Purifier User Manual

Mi Water Purier
Equipment
The main box
Install the main lter box near faucet. At the same time, make sure that length of
water pipe of lter is su󰀩cient for connection to a source of water.
Touch control unit
Take out sensor unit and water pipe and connect them to faucet.
4 lter cartridges
Cut the package and remove all 4 lters, install the main unit, according to their
serial number.
Accessories
In box with accessories, you will nd adapters for faucet and a small wrench.
Adapters t most faucets. Using wrench, unscrew the aerator, but instead install
adapter.
Adapter: connect sensor unit to faucet
Instructions and warranty card
Picture of accessories
Internal thin
carving adapter
F22
Internal thin
carving adapter
F20
Internal tight
carving adapter
F20
Small wrench
External carving
adapter
W24
External carving
adapter
W22
External carving
adapter
F20
XIAOMI-MI.COM

Xiaomi Mi Water Purifier Specifications

General

Filtration Method	Reverse Osmosis (RO)
Rated Voltage	220V
Rated Frequency	50Hz
Operating Pressure	0.1-0.4MPa
Applicable Water Temperature	5-38°C
Filtration Stages	5
Water Purification Flow Rate	1.0 L/min
Smart Features	filter replacement reminder
Installation	Under sink
Product Type	Under Sink Water Purifier
Filter Lifespan	24 months (varies with usage)