Xiaomi Viomi User Manual

water input hole
dust protection cover
cartridge
tank for
untreated
water
tank for clear water
cover
life indicator of
cartridge
start button
reminder of cartridge
replacement
remainder of life of
a cartridge
it is time to replace
a cartridge
Ultraviolet
disinfection device
Accessories: 2 cartridges
USB - cable
Water Filter
Quick start
1. Unpacking of lter and cartridge
Remove a lter cartridge from packaging, wash and wipe it
with a dry cloth.
Note: Do not wash the lter in a dishwasher, do not immerse
it in water and do not wash hole for charging.
2. First soak of a cartridge
Immerse cartridge in water at room temperature for 10
minutes, gently shake it to remove air pockets. After 10
minutes of total soaking of a cartridge, remove it from the
water.
Recommendation: Use distilled (puried) water to soak a
cartridge for better ltering e󰀨ect activation.
Note: please do not soak a cartridge in a tank for treated
water to avoid damaging ultraviolet lamp.

Xiaomi Viomi Specifications

General

RO Membrane	Yes
Installation Type	Under sink
Filter Type	RO Membrane
Smart Features	Water quality monitoring
Material	Plastic
Filter Lifespan	6-12 months (depending on usage)

Summary

Quick Start Guide

Unpacking Filter and Cartridge

Remove filter cartridge, wash, and wipe with a dry cloth. Do not wash in dishwasher or immerse.

First Soak of Cartridge

Immerse cartridge in water for 10 minutes, shake gently. Use purified water for best results.

Operating Instructions

Installation and Clearing Filter

Place soaked cartridge in untreated water tank, then add water and flush filter 2 times.

Turning Indicator of Cartridge Life

UV Disinfection

Press button to activate UV lamp when water level is reached; it expires automatically after 2 minutes.

Charging UV Disinfection Device

Cartridge Replacement Procedures

Checking Cartridge Lifetime

Procedure for Changing Cartridge

Remove old cartridge, soak new one twice, then restart indicator.

Starting New Cartridge Usage

After replacement, hold start button for 3 seconds to reset the cartridge timer.

Reminder Mechanism

Device Functions and Troubleshooting

Core Device Functions

Problem Diagnosis and Solutions

Guidance for cartridge issues, leakage, UV indicator, and lid sealing problems.