Xiaomi Mi WiFi Range Extender AC1200 User Manual

7
If the signal is poor, move the range extender to another
location where there are no large obstacles between the
range extender and the router.
If the range extender is offline, check that the router is
emiing a WiFi signal. If the router is working normally,
restart the range extender and try again.
Check whether the range extender was blacklisted by your
router.
If the issue persists, hold down the reset buon for at least
5 seconds until the indicator is constant orange. Reconfigure
the seings and try again.
1
2
3
4
English
You can manually find Mi WiFi Range Extender AC1200 in
the in-app device list and add it following the instructions.
Q1. What should I do if the Mi Home APP/Xiaomi Home App
doesn’t find my device during setup?
Reset the range extender to factory seings and reconfigure
the seings.
Q3.How do I configure the seings if I want to connect the
range extender to a new Wi-Fi network?
Q2. What should I do if the Mi WiFi Range Extender AC1200
stops working?
FAQs (frequently asked questions)

Xiaomi Mi WiFi Range Extender AC1200 Specifications

General

Frequency Bands	2.4GHz, 5GHz
Antenna	2 external antennas
Ports	1 x 10/100Mbps Ethernet port
Security	WPA-PSK/WPA2-PSK encryption
Dimensions	84 x 100 x 82 mm
Power Supply	100-240V, 50/60Hz
Operating Temperature	0°C to 40°C
WiFi Standard	802.11ac
Maximum Speed	1200 Mbps
Button	WPS button