Bluetooth connection
•Press to enable the Bluetooth pairing status, and select the
speaker on the audio source device to complete Bluetooth
pairing. Then, the speaker can be used to play the audio content
on the audio source device.
•When the Bluetooth is connected, press and hold for 2 seconds
to disable the Bluetooth connection.
•It is recommended to fully charge the speaker with the charging
cable before initial use.
•Enable the Bluetooth and NFC functions on the phone, and touch
the icon on the speaker with the NFC sensor area of the phone
to automatically complete the Bluetooth connection between the
phone and the speaker.
•When the phone and the speaker are connected, touch the icon
on the speaker with the NFC sensor area of the phone to relay the
audio from the phone to the speaker for playing.
•The NFC function mentioned above is only available for Xiaomi or
Redmi phones with the NFC function. For more information about
the models supporting the NFC function, visit the official website.
Notes:
Charging
4
To Next Page
Loading...