•If no operation is performed or no audio is played on the speaker
for 15 minutes, it will be turned off automatically.
Note: This function can be disabled or customized in the app.
•In case of errors or other special circumstances, press and hold
for 10 seconds to restart the speaker. Or press and hold the button
"+" and the button "-" at the same time for 10 seconds to restore
factory settings.
Updating the system
•Update the system in time as prompted in the app. During the update,
make sure that the speaker remains on and connected to the app.
•The speaker cannot be used during the update. Once updated, the
speaker will restart automatically.
•After the speaker is restored to factory settings, all connection and
combination records and settings will be cleared.
•If the speaker has been connected to the app before, it has to be
manually deleted from the app after being restored to factory
settings to reconnect to the app. Besides, the speaker deleted
from the app can be reconnected to the app only after the speaker
is restored to factory settings.
Notes:
6
To Next Page
Loading...