Xiaomi QiCycle - Battery Charging; Power On;Off

5
Before using it for the first time, please
use the provided power adapter to charge
the pedelec and activate the battery.
If the battery power is too low, the battery
will sleep. Please charge it for a while and
then turn it on again.
The display screen shows the percentage
of battery power while charging (in
power-on state)
Press and hold the red power button on
the left side of the handle bar to turn on
the power. If there is no operation within
10 minutes, it will automatically shut
down.
Press and hold the red power button
on the left side of the handle bar in the
power-on state to turn o the power.
When the power is turned o, you can
ride the pedelec without electricity.
Tip: If the battery power is less than 50% and the bicycle is not used for 7
days, the battery will enter the sleep mode. You need to connect the power
adapter to activate it.
Non Power-Assisted Mode Power-Assisted Mode Digital Meter
Charge Percentage Light Charging
Battery Level Abnormal Temperature Indication System Error
Bluetooth Connection Status Speed Unit Walk Assist Mode
1 2 3
4
5
6
10 11 12
7
8
9
Charging
Connect the
adapter
Press and hold the red power
button: power on/o
Press and hold the red power
button in the power-on state: power o
Power on
Power o
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．
ｉＲｉｄｉｎｇ （Ｓｈｅｎｚｈｅｎ） Ｔｅｃｈｎｏｌｏｇｙ Ｃｏ．， Ｌｔｄ．