Xiaomi X20 - Page 13

12
Use a pin to press and hold the reset buon for 3 seconds until you hear a
voice prompt to indicate that the system has been reset successfully.
Then the robot vacuum will automatically restart, and the seings such as
scheduled cleanup and Wi-Fi connection will be restored to factory
defaults.
Reseing system
Reseing Wi-Fi
When switching to a new router or changing your Wi-Fi password, you will
need to reset the robot vacuum's Wi-Fi connection. To do so, turn on the
robot vacuum, then simultaneously press and hold the buons and
for 7 seconds. Follow the voice guidance to reset the Wi-Fi
connection. Once it is successfully reset, you can reconnect the robot
vacuum.
Note: Only 2.4 GHz Wi-Fi networks are supported.
You can set up virtual walls and restricted areas in the app to prevent the
robot vacuum from entering the areas that need not be cleaned.
Notes:
Before using this feature, a map must be saved in the app.
Moving the robot vacuum or significantly changing the layout of your
home may invalidate the saved maps and make the virtual walls and
restricted areas lost.
Virtual walls/restricted areas
How to Use
If you choose to clean up all areas when no map is saved, the robot vacuum
will clean square-shaped areas of 6 × 6 meters one by one. Aer a map has
been saved in the app and you select to clean up all areas, the robot
vacuum will automatically clean each room according to the planned route.
And it will return to the station aer the cleaning is completed.
Cleaning up all areas
You can use the Mi Home/Xiaomi Home app to set up zoned areas, and
the robot vacuum will clean the zoned areas you have selected.
Note: Zoned cleanup cannot completely keep the robot vacuum inside the
selected areas during cleaning. Remove any obstacles around the areas
prior to cleaning in case the robot vacuum goes out of the selected areas.
Zoned cleanup
In the do not disturb (DND) mode, the robot vacuum does not resume
cleanup, perform scheduled cleanups, or play voice prompts, and the
indicator turns off aer 10 seconds of charging. The DND mode can be
enabled or disabled in the app.
Note: Please refer to the app for more functions. Details of each function
are subject to the app.
DND mode
You can schedule cleaning time in the Mi Home/Xiaomi Home app. The
robot vacuum will automatically start cleaning at the scheduled time, then
return to the mop-cleaning station aer the cleaning is completed.
Note: If the Do Not Disturb (DND) mode is enabled, the robot vacuum will
not do the scheduled cleanup during the DND period.
Scheduled Cleanup