NetDisk User Manual Network Direct Attached Storage / NDAS
—————————————————————————————————————————————
XIMETA, Inc. www.XIMETA.com
—————————————————————————————————————————————
5
USB Mode
• Flip both dip switches up for USB Mode.
• Connect NetDisk directly to your PC’s USB port
using included USB cable.
• Make sure the power connector is connected firmly.
NetDisk Mini Cable Installation
NDAS Mode
• Connect NetDisk Mini to your switch (100 Base-TX)
with included Ethernet cable (straight through).
• For wireless users - Connect NetDisk Mini to your
wireless router or access point with included Ethernet
cable.
• Make sure the power connector is connected firmly.
Ethernet Mode
• Connect NetDisk Mini directly to your PC’s Ethernet
port using crossover cable (not included).
• Make sure the power connector is connected firmly.
USB Mode
• Connect NetDisk Mini directly to your PC’s USB
port using included USB cable.
• No power adaptor needed for NetDisk Mini when
connected to your pc/laptop through USB
Note: From this point forward, NetDisk will be used to
represent both NetDisk and NetDisk Mini.