Need help?Do you have a question about the XINDAK XF-2000 and is the answer not in the manual?
General| Brand | XINDAK |
|---|---|
| Model | XF-2000 |
| Category | AC Power Distribution |
| Language | English |
Indicator light status when the device is powered on.
Button to connect/disconnect power for output group 1.
Displays input voltage for reference.
Terminal for detecting correct power supply phase.
Light indicates phase mismatch; switch if illuminated.
Exchanges L/N wires for nonstandard power supplies.
Port for grounding when using 2-line power without earth.
Socket group supplying up to 5A, not controlled by power switch.
Sockets for sound source/preamp, max 600W, controlled by switch.
Interface for power conditioner input with fuse.
Set phase switch, connect power, verify voltage, and detect phase.
Turn on the power supply controlled switch and then the device.
Turn on the switch of the power using device.
Ensure proper phase connection and grounding.
Note factory phase switch setting for Schuko/US standards.
Do not dismantle; refer faults to qualified personnel.
Disconnect system from mains before any cable changes or cleaning.
To Next Page
