Need help?Do you have a question about the Xinje V5 and is the answer not in the manual?
General| Category | Inverter |
|---|---|
| Cooling Method | Forced air cooling |
| Model | V5 |
| Input Voltage | 3AC 380V±15% |
| Control Method | V/F control |
| Protection Features | Overvoltage, undervoltage, overcurrent, overload, short circuit, overheating |
| Communication Interface | RS485, Modbus RTU |
| Operating Temperature | -10°C to +50°C |
| Storage Temperature | -20℃~+60℃ |
| Humidity | 5%-95% (non-condensing) |
| Dimensions | Varies by model |
| Weight | Varies by model |
Outlines the manual's purpose and intended audience for understanding inverter operations.
Specifies manual usage for Xinje inverters and lists available electronic documentation sources.
Instructions for checking inverter upon delivery and general safety guidelines for use.
Critical safety warnings and precautions for installing and wiring the inverter correctly.
Provides a general introduction to the VB3/VB5/V5 series inverter's features and capabilities.
Details technical specifications, including voltage, current, frequency, and capacity for various models.
Illustrates the physical appearance and provides dimensional data for different inverter models.
Specifies environmental conditions and mounting guidelines for optimal inverter installation.
Covers wiring of main circuit, control circuit, and basic running wiring with diagrams.
Details the function of control panel terminals, jumpers, and internal wiring connections.
Provides guidance on EMC mounting, noise suppression, and proper grounding techniques.
Explains different running modes (jog, close-loop, PLC, etc.) and command control channels.
Describes the operation panel layout, key functions, LED indicators, and display modes.
Details the steps for powering on the inverter for the first time and initial checks.
Lists and categorizes all function codes (P0-PF) for inverter configuration and control.
Provides in-depth explanations and setting ranges for each function code group (P0-PF).
Lists common fault codes, possible reasons, and recommended solutions for inverter issues.
Explains how to access and interpret recorded fault codes for troubleshooting.
Outlines the steps and precautions for resetting the inverter after a fault occurs.
Guidelines for daily checks to ensure the inverter and motor are operating normally.
Procedures for periodic inspection and cleaning of inverter components for longevity.
Details the warranty terms, conditions, and service coverage for Xinje inverters.
Introduces RS485 communication, Modbus-RTU protocol, and networking diagrams.
Explains character structure, communication information, parameters, and function codes for Modbus-RTU.
Information on selecting and wiring brake resistors and units for different inverter models.
Lists specifications and mounting dimensions for available operate panel models.
Details the available lengths for extension cables used with the operate panel.
Lists terminal functions, power ratings, and feature support (Vector, RS485).
Details multi-function input, pulse input, relay output, and transistor output capabilities.
Maps terminal functions to input/output types and voltage ranges for different models.
To Next Page
