Xinje XP-18 Series - Soft Component Power Failure Settings; XP1;XMP1 Power Failure Settings; XP2;XMP2 Power Failure Settings; XP3;XMP3 Power Failure Settings

27
power is cut (No battery).
※3. The serial number of input coil and output relay are octal data, other memorizers’
number are all decimal data.
※4. There is no I/O point connected with exterior device can be used as interior relay.
Soft component power failure area setting:
XP1/XMP1:
Soft
component
Area Function Default value
Power failure
memory area
D FD8202
First address of the power
failure memory area of D
100 D100~D149
M FD8203
First address of the power
failure memory area of M
200 M200~M319
T FD8204
First address of the power
failure memory area of T
640 No set
C FD8205
First address of the power
failure memory area of C
320 C320~C631
S FD8206
First address of the power
failure memory area of S
512 S0~S31
XP2/XMP2:
Soft
component
Area Function Default value
Power failure
memory area
D FD8202
First address of the power
failure memory area of D
4000 D4000~D4999
M FD8203
First address of the power
failure memory area of M
3000 M3000~M7999
T FD8204
First address of the power
failure memory area of T
640 No set
C FD8205
First address of the power
failure memory area of C
320 C320~C639
S FD8206
First address of the power
failure memory area of S
512 S512~S1023
XP3/XMP3:
Soft
component
Area Function Default value
Power failure
memory area
D FD8202
First address of the power
failure memory area of D
4000 D4000~D7999
M FD8203
First address of the power
failure memory area of M
3000 M3000~M7999
T FD8204
First address of the power
failure memory area of T
640 No set