3.3 Trailer Cradle Mounting
An optional trailer mounting cradle can be purchased for easy device mounting for the XT4964.
The cradle will need to be screw-mounted or VHB Tape mounted to the position desired. The
XT4964 can be easily fastened into the cradle via a Phillips head screw. The angled edged of the
cradle is designed to withstand the impact of snow scrapers that may come in contact to the
cradle if mounted on the top of a typical trailer. Inside the body of the cradle where the device sits
are four drain holes. Do not use the drain holes for screw mounting cradles to surfaces.
3.4 Container Cradle Mounting
An optional container cradle can be purchased for easy device mounting for the XT4964. The
container cradle is designed for VHB Tape mounting only. The XT4964 can be easily fastened into
the cradle via a Phillips head screw. The shape of the cradle is designed to fit in the corrugations
of an ISO standard freight container. Inside the body of the cradle where the device sits are four
drain holes. Do not use the drain holes for screw mounting cradles to surfaces.
To Next Page
Loading...
Need help?
General
