Preparation
Begin to Calibrate
Use the latest versions of the gimbal firmware (20150521) and the
flight control firmware (20150710), or it can’t be calibrated;
The calibration methods is also suit for gimbal G;
Place the aircraft in the horizontal position, power on the remote
controller and the aircraft, and then press the bottoms of IOC,
Home and Auto-Take off/Landing in sequence;
1.
Roll down the left wheel (Flight Indicators Brightness Control Scroll
Wheel) and the right wheel (Camera Pitch Control Scroll Wheel) to
the bottom and keep it for 2s, and then release it;
2.
1
To Next Page
Loading...
Need help?
General
