Need help?Do you have a question about the Xirrus XR-630 and is the answer not in the manual?
General| Model | XR-630 |
|---|---|
| Product Type | Wireless Access Point |
| Number of Radios | 2 |
| Antenna Type | Internal |
| Power over Ethernet | Yes |
| Wireless Standards | 802.11a/b/g/n |
| Frequency Bands | 2.4 GHz and 5 GHz |
| PoE Support | 802.3af |
| Mounting Options | Wall, Ceiling |
| Mounting | Ceiling, Wall |
| Security Features | WPA, WPA2, 802.1X |
| Management | Web-based, SNMP |
| Operating Temperature | 0°C to 50°C (32°F to 122°F) |
Provides an overview of Xirrus wireless products, including the XR Series.
Explains the benefits and capabilities of Xirrus Wireless Arrays for modern networks.
Details security standards like WPA and WPA2 with AES for secure data transmission.
Describes how Xirrus Arrays provide increased wireless range and data rates.
Introduces optional functionality packages like RPM, RSM, and RAM.
Outlines hardware and network services required for successful deployment.
Provides guidelines for site surveys and deployment planning.
Explains automated setup and management using XMS or Mobilize.
Displays configuration, information, and admin history for the Array.
Shows network interface, map, spanning tree, routing, ARP, and DHCP status.
Provides spectrum analysis, intrusion detection, and channel history data.
Introduces the WMI as an easy-to-use graphical interface for array management.
Describes the WMI's layout with left/right frames and utility buttons.
Provides steps to log in to the WMI using host name or IP address.
Procedure for establishing global configuration settings for basic Array functionality.
Covers network interfaces, bonding, bridging, and DNS settings.
Details encryption, authentication, access control, and SSIDs.
To Next Page
