This document describes the XLINE BSF800 selfie holder, a versatile device designed for domestic use. It combines the functionality of a selfie stick and a tripod, featuring Bluetooth connectivity for remote control.
Function Description
The XLINE BSF800 is a selfie holder that allows users to capture photos and videos from various angles and distances. It integrates a rotating phone holder, an extendable telescope, and a handle that can transform into a tripod. The device includes a detachable Bluetooth remote control, enabling users to trigger the camera shutter remotely. This makes it ideal for group photos, self-portraits, and stable video recording.
Important Technical Specifications
- Model: BSF800
- Communication: Bluetooth
- Length Range:
- On a tripod: 22-83 cm ±3mm
- On a stick: 20-80 cm ±3mm
- Input: 5V --- 2A
- Maximum Bluetooth Transmission Power: -1 dBm ÷ 1 dBm
- Bluetooth Transmission Frequency: 2.4 GHz
- Bluetooth Frequency Range: 2402-2480 MHz
Usage Features
Preparing for Use:
The device comes with a detachable Bluetooth remote control. To remove it, pry up its lower edge and pull it out. To reattach, first place the upper part in the holder, then press the lower part to lock it in place.
Unfolding and Folding the Handle and Tripod:
- To unfold the handle telescope, grasp the handle/tripod with one hand and the top of the phone holder with the other, then pull them apart.
- Extend the telescope to the desired length.
- When the telescope is fully unfolded, if the handle/tripod is not locked by hand, the tripod will unfold automatically. Spread the tripod legs and place them on a level surface.
- CAUTION: Do not press the tripod against the ground with excessive force, as this may damage it.
- To quickly fold the handle, grasp the device in the area of the remote control holder and push the telescope back in. The telescope and tripod will fold automatically.
- WARNING: Do not insert fingers between the tripod legs during folding.
Mounting the Phone in the Holder:
- Open the handle and fix the phone in it. Ensure your phone is securely attached before taking photos.
- The phone holder is rotatable, allowing you to mount your phone horizontally or vertically. When mounting the phone vertically, move it upwards in the holder to maintain the correct distance.
Bluetooth Connection:
- To pair the device with your phone, remove the remote control from the holder, press and hold the button until the LED indicator flashes green.
- Turn on the Bluetooth function on your phone, search for the "BSF800" device, and establish a connection. The LED will start to glow solid green.
- To disconnect, unpair or turn off the Bluetooth on your phone.
- After restarting the selfie holder, if the Bluetooth of the last paired phone is enabled, the remote control will automatically connect to it. If the Bluetooth of the last paired phone is turned off, the indicator will flash green to indicate that you should turn off the remote control, press and hold the button until the LED indicator goes off.
- To turn off the remote control, press and hold the button until the LED indicator goes off.
Taking Photos:
- Start the camera on your phone and place the phone in the holder according to the instructions above.
- Pair the remote with your phone using Bluetooth.
- Point the phone lens in the right direction and press the button on the remote control to take a photo.
Charging the Battery:
- CAUTION: Battery deterioration during operation of the device is a natural phenomenon. To keep the battery in good condition and extend its life, please follow these guidelines:
- When the indicator starts flashing red after turning on the Bluetooth remote, charge the battery of the device immediately.
- Connect the Micro USB cable plug to the charging port in the remote control and the other end to the mains charger. The indicator will start to glow solid red and charge the battery.
- When the battery is fully charged, the indicator will turn green.
- Do not start the device if the battery is discharged.
- Charge the battery according to the voltage and charging current data on the rating plate.
- Before a longer storage period, charge the battery to 50% and recharge it every 3-4 months. If it is not possible to determine a specific charge level in the product, discharge the device, then charge it for half the time required to fully charge it. Leaving a discharged battery for a prolonged period of time may result in its damage or loss of its properties.
- When using the device regularly, avoid fully discharging the battery and always charge it fully.
- Once the battery is charged, disconnect the charger plug from the charging socket on the device.
- Do not leave the device unattended while charging.
- Using chargers and cables other than those recommended in the device manual may lead to damage to the product and even an explosion of the battery.
- Charge in a dry, well-ventilated place that is not exposed to direct sunlight.
Maintenance Features
Cleaning:
- Wipe the phone holder, telescope, and tripod with a damp cloth.
- Store the device in a clean, dry place.
Safety and Hazard Conditions:
- Do not place the device near heat sources (e.g., heaters, microwave ovens, ovens).
- Do not open the device or change its design on your own, as this may damage the device and void the warranty.
- Do not throw the device in fire. This may cause an explosion or fire.
- This product may only be operated by children 8 or more years old, mentally and/or physically deficient persons, and persons without knowledge of or experience in operation of this appliance type if supervised or instructed in safe operation, with clear understanding of all related risks. Children should not play with the device. Children without supervision should not carry out the cleaning and maintenance of the device.
- Do not immerse the device in water or other liquids.
- Do not start the device if it is damaged. The device must be repaired by the service or a person authorized to do so.
- Do not expose the device to harmful atmospheric conditions such as excessive sunlight and moisture.
- Protect the device from falls and shocks.
- The device is intended for domestic use only, and not for commercial use.
- The battery should be charged in a dry and well-ventilated place, where the temperature remains in the range of 15-25°C.
- Do not switch on a damaged device.
- Do not attempt to charge a damaged battery.
- Do not throw the battery into fire.
- If the battery is damaged, discontinue its use and avoid contact with skin or eyes. In case of such contact, wash the area with water and seek medical assistance.
- Do not turn on the device in places where it is forbidden to use electronic devices, or when it may cause interference or other hazards.
- Do not leave the device unattended while charging.
- Do not damage, puncture, or open the battery.
- After use, do not dispose of together with normal household waste. The product and its parts should be handed over to a separate waste collection point in accordance with the law.
Troubleshooting:
- Problem: The remote does not work.
- Cause: Discharged battery.
- Solution: Charge the remote control battery.
- Problem: The remote does not connect with the phone.
- Cause: The remote is currently connected to another device.
- Solution: Disconnect Bluetooth with the current device and connect to the new device according to the manual.
Eco-Friendly and Environmentally Friendly Disposal:
This device is marked, in accordance with Directive 2012/19/EU of the European Parliament and of the Council of 4 July 2012 on waste electrical and electronic equipment (WEEE), with the symbol of a crossed-out waste container. Do not dispose of the device marked with this symbol together with household waste. For disposal, return the device to your local waste treatment and disposal facility or contact your local authorities.
Disposal of Waste Batteries:
In accordance with the EU Directive 2006/66/EC, as amended, on batteries, this product is marked with the symbol of a crossed-out waste bin. The symbol indicates that the batteries or rechargeable batteries used in this product should not be disposed of together with normal household waste. Users of batteries and rechargeable batteries must use the available collection network for these elements, which allows them to be returned, recycled, and disposed of.
You Can Help Protect the Environment!
Proper handling of waste electrical and electronic equipment contributes to avoiding harmful consequences for human health and the environment resulting from the presence of hazardous components and improper storage and processing of such equipment.
Need help?
General
To Next Page