Why do XM Instant Traffic and Weather channels sound different on my XM Car Receiver?
XM Instant Traffic and Weather channels on your XM Car Receiver use a different audio technology than other XM channels, which is why they often sound different.
What to do if my XM XMP3 Radio displays 'Check Antenna'?
If your XM Radio displays a 'Check Antenna' message, ensure the XM car antenna cable is firmly and securely plugged into the cradle and that the cable is not bent or broken. Reset the message by turning the XMp3 radio off, then on.
Why does my XM Radio say 'Loading'?
If your XMp3 radio displays 'Loading', it is acquiring audio or program information from the XM signal. This message usually disappears in a few seconds.
Why I am not receiving all the XM channels I subscribed to?
If you do not receive all the XM channels you subscribed to, refer to Activation in your XMp3 radio user guide if you have not yet activated your XM Satellite Radio service.
How to fix 'No Signal' on my XM Automobile Accessories?
If your XM Automobile Accessories unit shows 'No Signal', ensure the antenna is mounted outside the vehicle and away from obstructions. If you are in an underground garage, move the vehicle to an open area to regain signal.
What does 'Off Air' mean on my XM Car Receiver?
If your XM Car Receiver displays 'Off Air', it means the channel you have selected is not currently broadcasting. Try tuning to another XM channel.
Why does my XM Car Receiver audio fade or have static?
If the audio from your XM Car Receiver fades or has static, first check all cables for a secure connection. If the issue continues, it may be interference from another FM channel.
Why do XM Instant Traffic and Weather channels sound different from other channels?
XM Instant Traffic and Weather channels use a different audio technology than the other XM channels, which is why they often sound different.
What to do if my XM Radio has no audio?
If your XM radio has no audio, check all cables between your XMp3 radio and your stereo system to ensure they are firmly and securely connected.
Why does my XM XMP3 say 'Updating'?
If your XM Radio displays 'Updating', XM is updating your XMp3 radio with the latest encryption code. Wait until the update is done. Alternatively, you may be trying to tune to a channel that is blocked or unavailable, so tune to another channel.
To Next Page
General