6
Pairing Your Controller and the Car
Your XMODS operates at a frequency of 2.4Ghz.
Before driving the first time, you must pair the
controller and car.
1. Turn on the controller.
2. Turn on the car (The power switch is under
the chassis). The LED indicator on the car
flashes slowly.
3. Press and hold the car pairing button for
3 seconds; the car LED flashes quickly.
When the car LED stops flashing, pairing is
complete.
Note:
• Your car and controller remain paired for
future use, even when batteries are removed
from the controller or the car.
• If the pairing failed, turn off the controller
and the car, move closer, and then try again.
ON/OFF LED Indicator
LED
Indicator
Pairing
Button
To Next Page
Loading...