EasyManua.ls Logo

XMODS RC Start Kit - Mounting the Car Body; Attach Car Body to Chassis

XMODS RC Start Kit
12 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
7
Mounting the Car Body on the Chassis
1. Insert the chassis tab into the slot inside the front
bumper.
2. Lower the rear of the body so the tab near the
back of the car body enters the slot behind the rear
axle. Press gently until you hear a click.
To remove the body from the chassis, press the tab
from Step 2 gently toward the rear of the vehicle and
lift the rear part of the chassis. Gently slide the car
body’s nose from the chassis.