Page 29
gas grill conversion
CORRECT POSITION
(L.P. GAS)
PLACE GAS TYPE IN
THE CORRECT POSITION
REMOVE TOP
REVERSE
FOR L.P.
GAS
CORRECT
POSITION
FOR NAT
GAS
CORRECT POSITION
(NAT. GAS)
regulator gas conversion
These instructions describe how to convert a Maxitrol regulator to use either natural gas
(NAT- 4") or liquid propane gas (LPG-11")
Carefully remove the top nut cap from the regulator
Remove Nut Cap and review the small Plastic piece inside the regulator
Remove Plastic Piece and turn to the GAS TYPE that you are converting to (see
diagram) The plastic piece is clearly market LP or NG.
4. Replace brass top onto the regulator
GAS OUT
GAS IN
UNDERNEATH OF THE REGULATOR
Nut Cap
To Next Page
Loading...
Need help?
General
