Need help?Do you have a question about the Xomax XM-R266 and is the answer not in the manual?
General| Bluetooth | Yes |
|---|---|
| Power Output | 4 x 60W |
| Radio Tuner | FM/AM |
| Navigation | No |
| DIN Size | Double DIN |
| SD Card Slot | Yes |
| DVD Player | Yes |
| Remote Control | Yes |
| Rear View Camera Input | Yes |
| Resolution | 800 x 480 |
| Equalizer | Yes |
| Steering Wheel Control | Yes |
| Display | 6.2 inch touchscreen |
| Audio Formats Supported | MP3, WMA |
Instructions for safe handling, appropriate loudness, and operating temperature limits.
Proper connection of power supply, grounding, and fuse replacement procedures.
Warnings against overheating, moisture, and advice on cleaning to prevent damage.
Do not attempt self-repair; consult professional technicians for any technical issues.
Recommendations for professional installation, warranty considerations, and vehicle preparation.
Steps to take before installation, including disconnecting the battery and verifying power supply.
Ensure vehicle compatibility (DIN size) and identify necessary accessories like faceplates.
Detailed instructions on proper grounding, connecting cables, and wiring color conventions.
Specific guidance on connecting speaker cables, including negative terminals and unit's speaker capacity.
Ensure speakers meet impedance (4-8 Ohm) and wattage requirements; check for intactness.
Isolate unused cables with tape and secure all wiring to prevent shorts and damage.
Connect the red cable to the ignition switch for automatic power off and battery saving.
Install the unit at an angle of +/- 30 degrees for optimal performance.
Details on included fixture accessories like metal sheet, bolt, nut, and washer.
Information regarding the installation frame, which is pre-fixed to the unit's housing.
Tools required for deinstallation: spanner (wrench) and optional extraction keys.
Procedure to unloose the fixation nut on the rear side of the unit, if applicable.
How to insert extraction keys into recesses to release the unit from the installation frame.
Pressing holding side-cogs with extraction keys to release the unit from the frame.
Pulling the unit out of the frame and disconnecting all cables, including the ISO multicore.
Final step to remove all installation accessories like fixation metal sheet and frame.
Pin assignment details for the power supply socket (terminals A1-A8).
Pin assignment details for the loud speaker terminals (terminals B1-B8).
Note on potential variations in ISO plug pin assignments and the risk of errors.
Troubleshooting steps for a non-functional remote control, including battery and receiver checks.
Cause and solution for the unit failing to power on, typically due to ISO cable connection.
Solutions for poor radio reception based on antenna type (passive, active, diversity).
How to resolve loss of stations/settings when unit is turned off via ISO cable interchange.
Technical specifications including operating voltage, installation size, output power, and impedance.
Details on FM tuner range, USB port type, and SD card slot specifications.
Technical details for Bluetooth connectivity, including version, profiles, frequency, and output power.
Statement of compliance with European directives and manufacturer information.
User information on recycling electric and electronic devices (WEEE).
Obligation to dispose of empty batteries at municipal collection points.
To Next Page
